FR or Flame Resistant clothes are the special items that provide thermal insulation to protect your skins from getting burned and excessive heats. These clothes do not melt on the skin and will prevent a further burn injury.

The special clothes need special treatment and care; for further details, you can click on this site. Before buying apparel, go through the instructions carefully and clear your doubts from the seller.

If you are in search of the ways to take care of flame resistant garments, then follow the below-given instructions for results.

Industrial wash:

Flame resistant clothes must be treated separately from other clothes to prevent damaging of the luminescence. Soft water is only recommended for washing. Only non-ionic formulas must be used. Chlorine bleach and natural soaps must be strictly avoided.

The adequate proportion of formulas must be used, and the wash temperature must not be more than 140°F as it cleans the dirt from the garment thoroughly. For heavily soiled clothes, a flush at 40°C at the beginning will be helpful.

Never over-dry the garments, and the stack setting must be at 165°F, for making the appearance better, let it cool down properly and do a tunnel finish.

Home wash:

Wash Flame Resistant clothes separately in a cotton cycle at a normal water temperature, which must not exceed 140°F. Any normal detergent will work effectively, and soap is not at all recommended. For the reduction of abrasion, turn the garment inside out at a higher level of water.

Any starch softeners and liquid non-chlorine bleach must not be applied as they may serve as a fuel. Soft water cleans the contaminants more easily than hard water.

All the contaminants must be cleared right away during the washing process, and pre-soaking may help in this case. If still it does not work, dry clean the item and avoid over-drying of the cloth.

Removing stains:

If any flammable substance contaminates a garment, it must be eliminated instantly and replaced with a dirt-free flame-resistant cloth. It is difficult to determine that the flammable soils are removed completely.

Stains and odours are not the only indicators that the soil is not removed entirely. Flammable materials like gasoline are the volatile substances that cause discolouration of the item. If the home wash proves unworthy, then commercial laundry may be required for the purpose.

For the removal of oil and greases, dry cleaning may help you out. Tests like bulwark may prove destructive and may damage the garment permanently; therefore, they must be avoided. For further details, do not forget to consult the manufacturer of the garment and investigate the details.

Maintenance and repair:

As garments like a flame, thermal, and arc resistant are a special type of item, it requires some special treatment and care. The maintenance can be done both by commercial and home wash, according to the type of soil and dirt present.

There is no specific repair for bulwark, zippers, or any other items that are needed to be replaced. Only materials that are equivalent to the original material must be used during repair. In case of a small repair, use heat seal flame-resistant patches.

While you are dry cleaning an FR garment, make use of petroleum solvent or tetrachloroethylene. Do not wash the clothes roughly, and do not dry it under direct sunlight for too long.


In short, we can say that it is very much important to take care of FR or Flame resistant clothes, not only because the formalities are excessive, but to make it available for the long run.

Use the temperature as recommended to prevent any damage. Stop using any harmful chemicals to wash the items and follow the rules carefully.